Here is my “Spindle Extender Improves Sanding Access” tip that appeared in the “Tips” section on page 12 of the AAW October 2024 “American Woodturner” Journal. Click here for PDF.
Using a readily available spindle extender makes sanding a lot easier. It creates more working access, so I can get my sanding drill in close between the headstock and the workpiece. The photo shows a 2-1/2" long spindle extender, which threads onto the lathe spindle.
Note: There is an important difference between a spindle extender and a spindle adapter. An adapter converts one thread size to a different thread size. For example, you may want to reduce your lathe spindle thread size from 1-1/4" × 8 tpi to 1" × 8 tpi. A spindle extender does not convert from one thread size to another; it simply extends the reach of the lathe spindle.
Purchase From
Oneway makes high quality spindle extenders. They are made of hardened steel and have a Morse
Taper thru hole.
Google Oneway Lathe Spindle Extender
Best Wood Tools Spindle Extender
Best Wood tools makes good spindle extenders that are less money than Oneway.
Google Best Wood Tools 3" Spindle Extender
Spindle Extenders by other manufactures, come and go on the web.
Note: If you are going to spin a big piece then you probably don't want a spindle extender
that is longer than 3 inches. A long one, may cause to much wobble and end in disaster.
Google Lathe
Spindle Extender