Tag Archives: Brushes

3M Roloc Bristle Disc

Photo: 3M Roloc Bristle Disc 1
I am now using “3M ROLOC Bristle Discs” to clean up my carvings on almost FLAT things. See above photo.

The ROLOC discs are a lot tougher than “3M Radial Bristle Discs” or “Sanding Wheel Brushes” from McMaster-Carr. You can really go at it and scrub a piece with a Roloc disc.

The Roloc discs work best on almost flat things or on the outside of bowls or hollow forms.
Continue reading 3M Roloc Bristle Disc

Sanding Wheel Brush

Photo: Sanding Wheel Brush 1

I have found that the “Sanding Wheel Brushes” from McMaster-Carr are a good alternative to the “3M Radial Bristle Discs” that I talk about in my “Power Carving Textures” blog entry.
Continue reading Sanding Wheel Brush

Power Carving Textures

Photo: Power Carving Textures 1

Here is some information I put together for a Power Carving Textures demo that I am doing at my local club.

I learned most of the stuff presented here in various wood turning symposiums and classes. Mostly from Al Stirt.

Continue reading Power Carving Textures